Fill a vehicle or charge an EV
Connect the correct nozzle, finish the sale and check when payment settles.
Fill a vehicle
- Park by a gasoline pump. Leave the engine off to avoid the optional explosion risk when refueling.
- Step out and press E at the pump to take a nozzle, then press E at the fuel cap to connect it. Use the same actions in the target menu if your server uses targeting.
- Check the pump meter while it fills. It normally stops at a full tank, unless overfill is enabled and triggers.
- Remove the nozzle from the vehicle. Return it to the pump to settle the bill. Removing it from the vehicle only pauses filling; returning or dropping it closes the sale.
A liquid-fuel pump serves both grades. On 1.0.2 with fuel selection enabled, choose Regular or Diesel when taking the nozzle. With selection off, the script picks the grade from the vehicle. Return the nozzle before trying another grade.
If you selected the wrong grade and get a contamination warning, shut off the engine and leave it off. Use fuel-system service at a station to drain the tank, or choose the service with repair if the engine is already damaged. The service leaves the tank empty; refill with the correct grade before driving.
Charge an EV
Use a charger rather than a liquid-fuel pump. Connect and return its plug the same way. You can charge with the engine on or off, including while someone sits in the car.
The pump measures liquid in US gallons; the charger measures energy in kWh. Garages and HUDs use the same 0–100% level for both.
More than one vehicle
By default, you can have four active nozzles across liquid fuel and charging, but you can only carry one. Connected vehicles can keep filling independently. Return a nozzle or finish connecting it before picking up the next.